Just a Box - 30x60x90
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I was curious if I could, so I did. Printed in about 11mins, only 2 layers thick. This is a 30x60x90mm box.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 99
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I was curious if I could, so I did.
Printed in about 11mins, only 2 layers thick.
This is a 30x60x90mm box.
Instructions:
1. Print flat, on whatever bed you'd like. The ones with patterns are cool.
2. Fold it up along the edges. I folded mine so the patterned side was on the outside
3. Glue the little flaps on the side of the box and the bottom if you'd like it fully secured, side alone will work though
(*) I used a drop of CA glue to hold the tabs together, I'm sure you could use a different type.
Let me know how it works out and please share what you do,