Large Gauge Knitting Looms
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This are knitting looms I designed to be similar in gauge to the Knifty Knitter line of looms.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 119
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
Update:
I've got a new version of large gauge loom that is parametric! If you've got Fusion, you can modify the peg count and the number of pieces it cuts the loom into for printing. There are also two types of pegs available. They are very slightly different than these looms and the pegs might not be compatible between the versions.
These are knitting looms in a ¾ inch large gauge. This is similar to a Knifty Knitter loom in size, but with pegs that are a bit different. The parts of the loom insert and casing are easy to glue together offset (like bricks).
The pegs that are included in the main file are very tight fitting, they won't need to be glued in. This does depend on the materials you use to print and how much they shrink. I used a small hammer to get them fully seated. I've included a looser fitting peg in the extra files. In the main file I've included plates for printing pegs in all one color, half sets to swap out for odd/even type stuff, or a three color pattern with a starting peg, then two colors for the rest. The 3mf for the loose pegs also has this arrangement.
Materials: The loom can be printed in whatever material you like, but the pegs would be more durable if you print with PETG/ABS/ETC. I've been using PETG and the pegs hold up quite well, and they smooth with use.
The body of the loom prints fine at .2mm layer height, the pegs should probably be closer to .12. This makes the peg much smoother to have yarn running over. I also suggest doing 3 walls and a few extra top and bottom layers as well as bumping the infill to 50% to be more substantial to give strength to the pegs. I know some of you wrap those pegs tightly, and we want to make sure they hold up.