LED flasher mounting base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounting base for ASPL sync feature ultra slim 12-LED flashing strobe light. 103mm between screws, 113mm overall width.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 45
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I bought a set of “ASPL 8pcs Sync Feature Ultra Slim 12-LED Surface Mount Flashing Strobe Lights”
https://www.amazon.com/dp/B09DL6PYNX
I wanted to mount them on a mower without drilling holes. These backing plates provide a mounting surface to accept screws and a relief space for routing the wiring. Attachment of light to mounting plate is done with 10-12mm M3 cap head screws. Actual attachment to the mower is done with servo tape (double sided, reusable, tape with a texture like cured rubber cement) applied to the back of the mounting plate.
In addition to the backing plate model, there is a model for a wiring support. The support can also be attached with servo tape and has a provision for use of a zip tie to retain the wiring cable.
Video of flashers on mower:
Fusion 360 source and .STEP files included.