Wire Coiler and Straightener
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A tool that allows you to coil any malleable wire and uncoil them for easy storage and use
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 244
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
A tool that allows you to coil any malleable wire and uncoil them for easy storage and use
This was made specifically for single-wire 1.5mm copper wires although it could work with something smaller and not bigger than 1.5mm useful for keeping project wires together
Usage : For coiling, using the small “hook” put a straight wire there and start twisting until all the wire is coiled then twist the straight one and pull it out of the device. For Straightening, using the coiled wires put it back on the device but this time do not put it on the “hook” just somewhere in the middle and uncoil a small bit manually and pull it straight the results are a pretty straightened wire
Best printed on 100% infill for long term use but also works at 20% for smaller wires