1 / 2
Feuerwehr Geräteauszug Griff Ziegler (Fire truck equipment pullout handle) — zdjęcie 1
1 / 2

Feuerwehr Geräteauszug Griff Ziegler (Fire truck equipment pullout handle)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

spare part

Ocena
0 / 5
Polubienia
22
Pobrania
67
Wydruki
0
Wyświetlenia
1744
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

 

Der Griff eines Ziegler-Geräteauszuges war defekt und konnte nirgends bestellt werden. Deshalb habe ich den Griff nachgezeichnet und 3d-gedruckt.

Ich habe 3 verschiedene Modelle hochgeladen.

  • Ein Modell, dass möglichst nahe am Original ist, 
  • eins mit einem stärkeren Griff 
  • und eins mit einem sowohl stärkeren als auch weiteren Griff.

Es müssen mindestens 2 der Schrauben durch längere ersetzt werden. Ich glaube das waren M6x30mm Schrauben. (Könnte das vielleicht nochmal jemand bestätigen?) Ich glaube der dritte Bolzen hat gepasst.

Ich habe die Griffe mit ASA gedruckt. Meine Einstellungen sind in den 3mf Dateien gespeichert. Ich habe 5 Konturlienien und 50% Infill gewählt. 

#####################################################

The handle of a Ziegler appliance drawer was broken and could not be ordered anywhere. So I traced the handle and 3d printed it.

I've uploaded 3 different models.

  • One model that is as close as possible to the original
  • one with a thicker handle
  • and one with both a thicker and wider handle.

You need to replace at least 2 of the screws with longer ones. I think they were M6x30mm screws. (Could someone maybe confirm this again?). I think the third bolt fitted.

I've printed the handles with ASA. My settings are saved in the 3mf files. I've chosen 5 outlines and 50% infill. 

Tagi