Medium 3-Inch Pillar Candleholder for Electric Candles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An elegant, medium-height candleholder for a 3-inch electric pillar candle. Adds charm to any setting.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 88
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial
3-Inch Pillar Candleholder
A minimalist candleholder designed to hold a 3-inch (76mm) electric pillar candle. Featuring simple curves, this sleek, single-piece design is easy to print and blends seamlessly into any decor style.
Complete the look with the full set of three candleholders: tall, medium (this model), and small.
Print Settings
- Dimensions: 92.07mm (H) × 85.11mm (W) × 85.06mm (D)
- Material: PLA (compatible with other filaments)
- Supports: Required (Everywhere) — A cross pattern works best for supporting rounded overhangs
- Infill: 15–20%
- Layer Height: 0.2mm
Note: To reduce support usage, consider splitting the model in half and printing both sides separately, then gluing them together after printing.
Post-Processing
Sanding and painting can enhance the finish, but are entirely optional and based on user preference.
Optional Weighting Tip:
To add stability and a more substantial feel to the candleholder, consider using gyroid infill during printing. After the print is complete, drill a small hole into the bottom and fill the interior with a weight-enhancing material. Table salt is an excellent option—it's fine-grained, inexpensive, and readily available at most dollar stores. Once filled to your desired weight, seal the hole by hot-gluing a round piece of felt or non-slip pad over the base for a clean and functional finish.