1 / 5
Tall 3-Inch Pillar Candleholder for Electric Candles — zdjęcie 1
1 / 5

Tall 3-Inch Pillar Candleholder for Electric Candles

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An elegant, taller candleholder for a 3-inch electric pillar candle. Adds charm to any setting.

Ocena
5 / 5
Polubienia
17
Pobrania
74
Wydruki
0
Wyświetlenia
184
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

3-Inch Pillar Candleholder

A minimalist taller candleholder designed to hold a 3-inch (76mm) electric pillar candle. Featuring simple curves, this sleek, single-piece design is easy to print and blends seamlessly into any decor style.

Complete the look with the full set of three candleholders: tall (this model), medium, and small.

Print Settings

  • Dimensions: 120.73 mm (H) × 85.1mm (W) × 85.08mm (D)
  • Material: PLA (compatible with other filaments)
  • Supports: Required (Everywhere) — A cross pattern works best for supporting rounded overhangs
  • Infill: 15–20%
  • Layer Height: 0.2mm

Note: To reduce support usage, consider splitting the model in half and printing both sides separately, then gluing them together after printing.

Post-Processing

Sanding and painting can enhance the finish, but are entirely optional and based on user preference.

Optional Weighting Tip:
To add stability and a more substantial feel to the candleholder, consider using gyroid infill during printing. After the print is complete, drill a small hole into the bottom and fill the interior with a weight-enhancing material. Table salt is an excellent option—it's fine-grained, inexpensive, and readily available at most dollar stores. Once filled to your desired weight, seal the hole by hot-gluing a round piece of felt or non-slip pad over the base for a clean and functional finish.

Tagi