Prusa Core One Ball Bearing Spool Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Prusa Core One ball-bearing spool holder for smooth and space-saving filament unwinding.
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 38
- Wydruki
- 2
- Wyświetlenia
- 722
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I have printed several of the available ball-bearing spool holders for the Core One. While they functioned flawlessly, I found that the holders protruded too far from the printer. This would have prevented Haasi's upgrade (Prusa Core One Drybox Upgrade) from being installed without modifications. Therefore, I had to come up with my own solution and designed my own spool holder. The original Prusa spool holder projects 80mm; the upgraded, ball-bearing version projects 84mm.
In addition to the printed parts, you will need the following to complete the assembly:
- M8x70mm Socket Head Cap Screw (1)
- M8 Flange Nut (2)
- 2x 8x20x7 Ball Bearings (608) (3)
- 4x M3 Threaded Inserts
The completed base without the spool body should then look as follows
I hope this upgrade can help others in the community who may have a similar issue.
Stay tuned for more innovations, and happy printing.
Until the next print,
S1lureX