Aqua Computer Ultitube 120mm fan mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Aqua Computer Ultitube 120mm fan mount
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 119
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
AquaComputer make some great stuff, but they fail hard when it comes to actually connecting their products to other things. This is the result of me discovering their Ultitube mounting ring is utterly useless on its own, and the D5 NEXT's silicone mount is only good as long as gravity is assisting…
Drop me a msg if you need a 140mm version.
Requires:
- 1x M3 screw 5-6mm long (or longer with washers) because the supplied one only has 4mm of thread and the mounting ring can only accept 2-3mm of thread
- 2x PC fan screws
Note this isn't meant to take any weight, just stabilise the top of the res. It should be able to, just be aware of the orientation.
Printing:
I've done mine in PLA+, but pretty much any material will work here. Make sure it's printed upside down with the central “U” groove pointing up, and that's about it
I strongly advise using the fan screws to pre-tap the threads before installation. It's pretty tight, and you'll want to back the screw out a couple of times to clear the thread to avoid splitting