Retro Industrial Wall Lamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall mounted lamp with a retro industrial appearance
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 301
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
My take on a retro industrial (or steampunk) themed light fixture. Designed in two parts for easy printing. Assembly is simple and requires no glue. Should mount easily using standard drywall anchors (or equivalent). #8 or M5 screws should work equally well. Uses 4 M3x8 countersunk screws to fix the mounting plate to the main body.
Files are oriented for optimal printing, though the lamp body will require some organic supports. The gear faces have insets that bridge just fine and need no support. I printed my example in PLA using .2mm layers, 3 perimeters and 15% gyroid infill. Should be printable with most materials such as PLA, PETG, and ABS/ASA (you may need to compensate for materials that are prone to shrinkage).
For the look and feel I was aiming for I used a fabric covered pendant light cord and an Edison style LED bulb such as shown here: https://a.co/d/9gOeOin