Valve Index Base Mount Corner Bracket: Command Strip Version
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A quick remix of TheNam3less' "Valve Index Base Mount Corner Bracket" on Thingiverse for use with 3M Large Command…
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 131
- Wydruki
- 0
- Wyświetlenia
- 1160
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Virtual Reality
- Licencja
- Creative Commons — Attribution
A quick remix of TheNam3less' "Valve Index Base Mount Corner Bracket" on Thingiverse for use with 3M Large Command Strips. (https://www.command.com/3M/en\_US/command/products/~/Command-Large-Refill-Strips/?N=5924736+3294529207+3294773680&rt=rud ) to save from drilling holes in the wall. Each Large Command Strip is rated to 5 pounds, so it should be more than enough to hold the Base in place.
I filled in the holes for the wall screws and added recessed areas on the backside to place the command strip instead.
Print instructions
Category: Video Games Print Settings
Printer Brand: Prusa
Printer: Mk2.5s
Rafts: No
Supports: No
Resolution: 0.2mm
Infill: 10% Gyroid
Filament: eSun PLA Black
Notes:
Print standing upright and no supports are needed, but it takes a little longer than printing face down.