SparkFun gps-rtk-sma case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple case defined in OpenSCAD.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 105
- Wydruki
- 0
- Wyświetlenia
- 313
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Public Domain
OpenSCAD file for the SparkFun GPS-RTK-SMA
Source file based on YAPP_Box Demo RealBox - transmitter/receiver v3.0
Note: Requires the YAPP_Box OpenSCAD library
- SKU: GPS-16481
- Product link: https://www.sparkfun.com/sparkfun-gps-rtk-sma-breakout-zed-f9p-qwiic.html
If you want the board STL, I couldn't find the SMA version, but the very similar U.FL board can be found here. You will need to convert the STEP file into STL.
I have some bottom pins that I left on the board in case I want to use them for powering the board in future endeavors. The height of the base could be reduced for a slimmer case.
I did not include holes for the Qwiic connections, but using the schematic, it would be fairly quick to add them to your OpenSCAD file and render an updated box.
Printing parameters used
- 0.4mm nozzle
- 0.20mm layer height
- PLA
- No supports
- No raft
Project link: https://github.com/muddygs/OpenSCAD/tree/main/sparkfun-rtk-gps-sma