Koppla Powerboard Holder for Ikea Mittzon Desk
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of Gregor1991s model to provide a frame for the Koppla Powerboard when not using the complete Mittzon desk frame.
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 175
- Wydruki
- 1
- Wyświetlenia
- 1125
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a remix of Gregor1991s model to provide a frame for the Koppla Powerboard when not using the complete Mittzon desk frame. As the support for the powerboard is built into the desk frame and not the add-on module, if you use the add-on module stand alone, there is no mechanism to hold the power board.
I've cut the model in half to better fit on the print bed of a Mk4 (et al) and extended it by 2mm for improved fit. Lastly added a base (with a hole for the plug and cord) for improved mechanical support of the power board when plugging in cables.
Depending on the desired top surface finish, supports may be required to print.