RepRackHanger IKEA HUGARD Extension
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Extension for CNC Kitchen’s RepRack Hanger – holds spools up to 300 mm, still fits smaller spools.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 56
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
This is an extension for CNC Kitchen’s RepRack Hanger for IKEA HUGAD 28mm.
It allows you to store filament spools up to 300 mm in diameter, such as 2.5 kg spools from Extrudr, while still supporting smaller spools on the original hanger.
Designed to integrate seamlessly with the original RepRack Hanger, providing extra capacity without losing compatibility.
Usage: The extension simply slides onto the original hanger as shown in the photos. For permanent installation, the two parts should be fixed together with a small amount of super glue.
Printing information
The STL file is correctly aligned.
Layer height: 0.2 mm
Perimeter: Use at least 3 perimeters for strength
Infill: 15 %
Support: no
I am looking forward to your Makes! :-)
If you like this design, feel free to check out my others here.