Mikrotik RB4011iGS Cable routing stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just a simple project to help organize cabling with a Mikrotik RB4011 router
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 157
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
I've designed a simple stand to organise network cables with the Mikrotik RB4011. Prints fine without supports and has plenty of clearance for ventilation. I've also put some 8mm silicone furniture dampers on mine to serve as feet for the stand.
If you print the 20mm tall model the front of the router will lift with CAT 6 cabling due to the stiffness of the cables (CAT 5/5e will probably be ok since it doesn't have the plastic divider between the twisted pairs), this can be remedied with some double sided tape. I've also made a 30mm tall model if someone prefers not to use the tape, personally I didn't print it as I'm happy with solving the issue with tape.