Ersatzteil für Ventilatorenfuß / Spare part for fan base / parametisiert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ersatzkappe für den Metallfuß eines elta-Ventilators / Replacement cap for the metal foot of an elta fan
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 28
- Wydruki
- 1
- Wyświetlenia
- 162
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
deutsch
Bei unserem alten elta-Ventilator sind im Lauf der Jahre die meisten Endkappen an den Metallstangen des Ständers verloren gegangen. Statt auf Gummifüßen stand er auf dem Megall, was für den Boden nicht gut war. Ich habe einen einfachen Ersatz konstruiert und ausgedruckt. Zusätzlich benötigt man noch jeweils einen 3 mm dicken Filzgleiter.
Die openscad-Datei ist leicht für andere Gestelle oder Filzgleiter anpassbar.
Ich habe mit PLA gedruckt, mal sehen, ob das Material für diesen Zweck taugt.
Kein Rand, keine Stützen.
english
In our old elta fan, most end caps have been lost on the metal bars of the stand over the years. Instead of rubber feet, he stood on the Megall, which was not good for the floor. I designed and printed a simple replacement. In addition, you need a 3 mm thick felt glider.
The openscad file is easy to customize for other frames or felt gliders.
I printed with PLA, let's see if the material is suitable for this purpose.
No edge, no supports.