Parametric MagHex tiles for Gloomhaven
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a parametrically redesigned version of the original maghex tile system for gloomhaven.
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 184
- Wydruki
- 0
- Wyświetlenia
- 3165
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a parametrically redesigned version of the original maghex tile system for gloomhaven. The main feature is improved snapping action for the magnets.
The tiles that fit into these bases can be found here: https://www.thingiverse.com/thing:3530085
Please note that my 3mm magnets are quite tight in the 3mm version, so I've also uploaded a slightly larger 3.2mm version. Make sure you test which size fits your magnets best.
The version in the movie is 3.0mm magnets in the 3.0mm version... You can see how much pressure they need to go in! (Those aren't coming out any time soon ;) )
The reason I redesigned this is that the magnets would just drop out of the original even though the magnets I had seems to be pretty close to the needed 3x3mm.
Changelog:
v9: initial upload
v12: removed chanfer on bottom to improve bed adhesion while printing
Print instructions
Category: Toy & Game Accessories Print Settings
Printer Brand: Prusa
Printer: I3 MK3S
Rafts: No
Supports: No
Resolution: 0.2mm
Infill: 5%
Filament: Any Any Any
Notes:
Recommended to print with a 0.4mm nozzle