BlindSlided - Foiresoft Custom Zebra Roller Blind Modification
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The blind bracket is long based on how you're mounting them. This allows adjustment between the blind and window.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 319
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Foiresoft Zebra Roller blinds fit well against our old windows. When we replaced the windows this year the bracket keeps the blinds too far away from the window. It was letting a light in around them.
I created this adapter called BlindSlided…I thought it was funny…
Slide into the existing slots of Foiresoft's bracket and blind clip when parallel with them, then twist it to lock it in using the rounded hold at the top.
The top notch with the rounded head is for the thicker top bracket that attaches to the wall. The lower notch is for the clip that holds the blind. Once installed you can push the blind closer to the window or pull it further away. Whichever suits your mood.
As a bonus it allows better access for dusting! Who doesn't love dusting?
Bracket adjustment (optional):
There is a metal tab that you normally hang the blind clip on. You can bend it flat. BlindSlided works without doing this, but it was easier for me to adjust without the pressure of their metal tab pushing down on the blind clip.
Disclaimer:
BlindSlided is a “do it yourself” free file with no guarantee or warranty implied. Follow the manufacturers installation instructions. This is a modification after you've installed them according to the manufacturer's installation guide. Any modification to a product may void the manufacturer's warranty. Please verify before modification if that's important to you.
I don't care. I void warranties regularly. ;)
Material: PETG (Nylon would probably work really well. I don't have any to test with…sad)
print flat, no supports
.2 layer height
4 shells
75% infill