Grenadier JBL Nano underseat mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Screwless mount to secure the JBL Nano Pro under the drivers seat in the INEOS Grenadier.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 492
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you don't have the Premium Sound upgrade in your Grenadier because you have the dual battery or didn't opt for it in the first place - it's an easy retrofit.
The factory wiring is located underneath the rear passenger seat and is a Standard Molex/Micro-Fit connector. In order to make it reversible I built an extension harness with a female to male Molex connector and roughly 1.75m of 1.5mm² cable. Routing is easy without the need to unscrew anything by just slightly lifting the factory rubber/isolation trims. The original JBL Nano Pro subwoofer fit's nicely under the (drivers) seat, but it can slip out into the direction of the door, so this mount slides into the existing holes of the JBL Sub and underneath the doortrim. No screws are needed.
Print settings: 25% Gyroid infill reccomended