1 / 15
120mm Fan plate with Bristled Brush cable Pass-through — zdjęcie 1
1 / 15

120mm Fan plate with Bristled Brush cable Pass-through

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Orientacyjna cena wydruku pliku

3,22 € – 3,94 € netto (bez VAT)

Dla pliku: 120mm fan plate with Bristled Brush cable Pass-through_0.24mm_PETG_MK4IS_3h41m.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 3,58 € netto (środek widełek).

Masa podana przez autora
57 g
Czas druku podany przez autora
3 godz.
Materiał u źródła
PLA
Materiał wyceny
PLA
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

Fan mounting plate for 120mm fan, with Brush cable Pass-through for cable management

Ocena
0 / 5
Polubienia
3
Pobrania
15
Wydruki
1
Wyświetlenia
253
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Fan mounting plate for 120mm fan, with Brush cable Pass-through for cable management.

NOTE: There is a small amount of post processing, After print cut along center of brush to separate the sides. this makes allows for the bristles to move a bit more allowing for easier cable pass-through.

Size: 203.2 x 152.4 x 10mm

Print recommendations:

  • 0.2mm Layer height
  • 0.4mm nozzle
  • PLA or PETG (Was tested with PETG, YMMV with other filaments)

Tested on a Ender 3v3

Tagi