8-inch carbon truss newtonian telescope
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
8 inch carbon truss telescope, Easy secondary mirror control, Losmandy type dovetail bars, F750 & F800 support
- Ocena
- 5 / 5
- Polubienia
- 49
- Pobrania
- 202
- Wydruki
- 5
- Wyświetlenia
- 1520
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
8-inch carbon truss newtonian telescope
8 inch carbon truss telescope
Esay secondary mirror control (Betty’s Secondary Mirror Holder style)
Losmandy type dovetail bars
Primary mirror D203F750, D203F800, secondary mirror 70mm support
200 x 200 3d printer output possible (300x300 3d printer recommendation)
<< cursion >>
I'm currently redesigning the dovetail mount for my 8-inch Newtonian telescope due to center of gravity issues. For now, please use a Dobsonian-style manual mount along the Losmandy mount route.
<< For dual focuser assembly, please refer to the link below >>
https://www.printables.com/model/1385830-dual-speed41-focuser
<< BOM >>
Compressd Spring (Wire Diameter 1.2mm, External Diameter 12mm, Length 20mm) 5ea
Single-sided sponge tape(1mm tick)
Double-side tape (1mm tick)
Instant adhesive
< lens >
primary mirror : Parabolic 8 inch(203mm) F750 or F800
secondary mirror : 70mm
< primary mirror cell >
m5 hex sockethead cap screw 10mm 3ea
m5 hex sockethead cap screw 30mm 6ea (vixen plate : 10ea)
m5 hexagon nut 9ea (vixen plate : 10ea)
m6 hex bolt 40mm 3ea
m6 hexagon nut 3
< primary mirror frame >
m5 hex sockethead cap screw 12mm 16ea
m5 hex sockethead cap screw 20mm 12ea
m5 hex sockethead cap screw 25mm 20ea
m5 hex sockethead cap screw 30mm 16ea
m5 hexagon nut 64ea
m6 hex bolt 30mm 8ea
m6 hexagon nut 8ea
< secondary mirror holder >
m5 hex sockethead cap screw 15mm 1ea
m5 hex sockethead cap screw 25mm 3ea
m5 hex sockethead cap screw 35mm 2ea
m5 hex bolt 30mm 1ea
m5 hexagon nut 7ea
< secondary_mirror_frame >
m3 hex sockethead cap screw 20mm 8ea
m3 hexagon nut 8ea
m5 hex sockethead cap screw 12mm 16ea
m5 hex sockethead cap screw 30mm 16ea
m5 hex sockethead cap screw 25mm 8ea
m5 hexagon nut 40ea
< truss_tube_end >
Hard Steel Pivot Ball 6x14x35mm(Arrma 1/8 Kraton Outcast Talion Typhon Notorious 1/7 Majove Limitless Infraction AR330197) 16ea
m6 nylon insert lock nut 16ea
< extension_dovetail >
m5 hex sockethead cap screw 50mm 2ea
m5 hex sockethead cap screw 30mm 10ea
m5 hex sockethead cap screw 25mm 8ea(750), 11ea(800)
m5 hex sockethead cap screw 20mm 4ea
m5 hex bolt 40mm 4ea
m5 hexagon nut 28ea(750) 31ea(800)
< focuser >
m3 hex sockethead cap screw 10mm 6ea
m3 hexagon nut 6ea
< mount >
m6 hex bolt 25mm 2ea
m6 hex sockethead cap screw 15mm 28ea
m6 hexagon nut 30