Zeta 57mm foot peg supermoto sliders
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sacrificial sliders design to take the impact and abrasion force for the zeta 57mm foot pegs.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 105
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Sacrificial sliders which utilize a U-bolt clamp to attach the Zeta Ultra wide 57mm foot pegs designed for the crf450.
1x U-bolts and 2x nuts are required to mount each slider to the foot peg. I used an 8mm wire rope grips for mine and grounded down the thread so it was flush with the slider.
Link to product I used: https://www.bunnings.com.au/taskmaster-8mm-316-stainless-steel-wire-rope-grips-2-pack_p0237871
Print settings used:
Walls: 5
Infill: 100%
Material: Best to use pure Nylon, TPU can also be used
Please note the effectiveness of these sliders have not been used so please share your experiences with me so I can improve upon them.