Universal Spool Centering Cone – Extended Range (Ø 51–78 mm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Universal Spool Centering Cone
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 87
- Wydruki
- 1
- Wyświetlenia
- 335
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Universal Spool Centering Cone – Extended Range (Ø 51–78 mm)
Description:
This is a modified version of the Universal Spool Centering Cone by Storm Design @Damian27
https://www.printables.com/model/752030-universal-spool-centering-cone-for-bambu-lab-filam
While the original design covered spool holes from 44 mm to 57 mm, my version supports 51 mm up to 78 mm.
This allows you to use a wider variety of filament spools, no matter if your spool holder uses bearings or not.
The centering cone helps keep filament spools stable and properly aligned, reducing wobble and ensuring smoother unwinding.
Recommended Printing Settings:
Material: PLA
Nozzle: 0.4 mm
Layer Height: 0.2 mm
Wall Loops: 4
Infill: 25%
Infill Pattern: Triangular
Supports: No
Brim: No
Notes:
Compatible with different spool holders (with or without bearings).
Fits filament spool inner hole diameters from 51 mm to 78 mm.
For best results, use smooth materials like PLA or PETG. Avoid TPU, as its rubber-like surface may interfere with proper centering.
If you print this model, please share your make and let me know how it works for you!