1 / 3
Prusa MK4S Nozzle Wiper (old bed frame)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Prusa MK4S Nozzle Wiper is designed for cleaning the printer nozzle immediately before printing.
- Ocena
- 5 / 5
- Polubienia
- 57
- Pobrania
- 109
- Wydruki
- 1
- Wyświetlenia
- 1303
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 3)Remiksy (0)Kolekcje (120)Powiązane
DOES NOT FIT THE REDESIGNED MK4 BED FRAME
- The project has been redesigned from scratch. It does not collide with the new MK4S/MK3.9S extruder and Z-axis.
- Clearance for printing plates of various heights.
- No screw inserts required.
- Uses dismantled or spare parts from the previous version of the printer.
- Hidden slots for easy disassembly.
- 3 positions: Cleaning, Plate replacement, Hidden with lock
Parts:
- 1x Silicone brush 8x37mm (Bambulab A1)
- 2x M3 10mm screws
- 1x M3 6mm screw
- 1x 20x6x2mm magnet (from MK3S hotend)
- 1x 10x6x2mm magnet (from MK3S hotend)
Printing:
- Layer 0.2mm
- 5 perimeters
- ASA/PETG
- Bottom part without supports
- Top part upside down with supports
Assembly:
Insert the magnets into the printed pockets. Pay attention to the correct polarization. Push them all the way in.
Place both printed parts together and screw M3 10mm screws into the printed holes from the sides. Tighten gently so that the parts can move freely.
Stick the silicone brush to the top part.
Screw the entire assembly to the bottom of the frame using an M3 6mm screw.
GCODE:
; CLEAN NOZZLE
G1 Z15
G1 X247 Y-4 F8000
G1 Z3.5
G1 Y25 F3000
G1 X249 F6000
G1 Y-4 F3000
G1 X251 F6000
G1 Y25 F3000
G1 X249 F6000
G1 Y-4 F3000
G1 X251 F6000
G1 Y25 F3000
G1 Z10
G1 X220 F8000
; END CLEAN NOZZLE