eB fan shroud remix for ender 3/CR10 style printers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple, light duct, no additional hardware required
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 201
- Wydruki
- 5
- Wyświetlenia
- 1394
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a mix of the original eB design by gibbed
https://www.thingiverse.com/thing:3419531
with ideas from the Mini-Me duct https://www.thingiverse.com/thing:4375296
I wanted to try the simple short duct of the eB shroud but was worried the stock hotend bolts might not be long enough. The Mini-Me duct, on the other hand, mounts behind the heatsink to the hotend screw posts and does not change the position of the bolts. Thus it should be more friendly with the stock bolts.
Also included is a version with a cutout in the heatbreak ducting so you can use one of these https://www.thingiverse.com/thing:3624012 to improve the airflow if you have the fan blowing towards the heatbreak.