Garde boue arrière pour VTT / Rear mudguard for MTB
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Garde boue arrière pour VTT / Rear mudguard for MTB
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 72
- Wydruki
- 1
- Wyświetlenia
- 418
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
Hauteur de couche 0,2
Le PETG fonctionne mais peut se casser. Il faut idéalement utiliser du TPU.
A fixer avec 4 colliers de serrage
Le fichier STEP est fourni, voici un exemple de personnalisation. Les effets de lumière sont dus aux plateaux d'impression utilisés.

J'ai aussi conçu un modèle de garde boue avant: https://www.printables.com/model/1386239-garde-boue-avant-pour-vtt-mtb-front-mudguard
Layer height 0,2
PETG works but is more breakable. Prefer using TPU instead.
To be fastened with 4 zip ties
The STEP file is included, see a customization example above. The light effects are due to the heating plate surfaces used to print the mudguards.
I also designed a front mudguard model: https://www.printables.com/model/1386239-garde-boue-avant-pour-vtt-mtb-front-mudguard