Dwarf 3 Equatorial Mode Helper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dwarf 3 Equatorial Mode Helper - it keeps the telescope at 48 degrees and keeps its weight between the tripod legs.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 98
- Wydruki
- 0
- Wyświetlenia
- 693
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I recently got a Dwarf 3 telescope and wanted to improve a little its use when in EQ Mode. Al the other solutions I found where a little to over engineered and I wanted something simple, light and easy to travel with. This one fits in the bag of the telescope and there is place for other things also.
I printed it in PLA with a 0.4mm nozzle, 0.2 mm layer height and 15% gyroid infill.
I do not think any specific settings are needed, but if you want more safety for your telescope, you can print it with more walls and maybe a stronger filament.
The holes fit some 3/8 to ¼ adapters, as I did not trust only the plastic to hold the weight of the telescope.