Mount for a Jebo UV Sterilizer Lamp power supply ... for Pond/Aquarium
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount for a JEBO UV-C clarifier
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 99
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Share Alike
This is a Power supply mount for a JEBO UV Sterilizer Lamp that you can buy from Aliexpress or somewhere else..
The Wall thickness is 2.25mm. A 0.4mm Nozzle has a extrusuion with of 0.45, so 5x0.45mm = 2.25mm.
If your slicer wants to print infill, you have to raise your Perimters to at least 3.
The ventilation slots all around are fake, exept at the bottom where the power cable is.
NO support material needed.
-----------------------------------------------------
Dies ist eine Netzteilhalterung für einen UV-C Klärer den man von Aliexpress, Ebay oder Amazon erwerben kann.
Die Wandstärke beträgt 2.25mm. Eine 0.4mm "Nozzle" erzeugt eine Extrusionsbreite von 0.45mm, also 5x0.45mm = 2.25mm
Wenn der Slicer infill Drucken will, die Perimter auf 3 erhöhen (da sollten sie eigentlich auch stehen).
Die Lüftungsschlitze sind ausser unten beim Stromkabel fake.
KEIN Stützmaterial benötigt.
dfkjhg9875409548jkjldß089dfglj