Water filter for rain barrel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Filter for a rain barrel. It is about 7 cm width and 6.5 cm high. It will fit on a rain barrel with a pipe which needs…
- Ocena
- 4,5 / 5
- Polubienia
- 47
- Pobrania
- 90
- Wydruki
- 2
- Wyświetlenia
- 978
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Filter for a rain barrel. It is about 7 cm width and 6.5 cm high.
It will fit on a rain barrel with a pipe which needs M27 nut.
I used a part of a pantyhose to create a filter. Just a knot below and the other part is folded inside and fixed with the lid of the filter.
I printed the filter with support for all the vertical holes, but maybe it is not needed and can it be bridged.
Just mounted it so not a lot experience with it. You need to clean the filter time by time.
In your slicer you have to rotate the lid 180 degrees and the both nuts 90 degrees.
Category: Outdoor & Garden