1 / 4
Pallet Toy (55mm Deep x 85mm Wide x 11.2mm Tall) — zdjęcie 1
1 / 4

Pallet Toy (55mm Deep x 85mm Wide x 11.2mm Tall)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Easy to assemble pallet - top part prints as one piece with two planks printed separately that snap into the bottom

Ocena
0 / 5
Polubienia
9
Pobrania
57
Wydruki
0
Wyświetlenia
164
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Building Toys
Licencja
GNU General Public License v3.0

Filament used: 4.2m to 4.5m (13.77ft to 14.76ft) - approx 12.5g-14g depending on filament used.

Because it's such a small part it should print in any material your printer's nozzle and bed can handle - very minimal bridging required.

This is a basic and easy to assemble pallet. The width is 85mm, depth (front to back) is 55mm, and height is 11.2mm assembled. Bottom planks are 1.6mm thick with 1.6mm protrusions to snap into the bottom of the pallet. 
 

The design has rounded corners on the protrusions to help with tolerances. 0.1mm of clearance is provided for fitment - if they do not fit well you can reprint the planks with slightly higher flow (1-2% extra) to make them fit more tightly or decrease by 1-2% to make them fit more loosely. Alternatively, you can glue them in place.

Printed with 0.2mm layer height with a 0.4mm nozzle - this should also print fine with a 0.6mm nozzle though I have not personally tested that yet!

Because the top section faces the bed you can change colours after the first few layers for a multicoloured pallet or a pallet with text embedded!

Tagi