Prusa XL Buddy camera mount enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Buddy3d camera mount for Original Prusa XL Enclosure
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 131
- Wydruki
- 2
- Wyświetlenia
- 690
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Camera holder for Buddy3D camera and PrusaXL with enclosure.
Easy to print, fast (with Prusa XL, 37min) and low material (13.4g).
Two different modells, one for those who believes that M3 screws against plastic is enough and one for you who does not believe that M3 screws can't “self-thread” in plastic and want to use heat inserts.
Both models have tight enough relistens to “lock” the screws to not self-unthread them self because of vibrations from the printer. I use the one without heat inserts
If someone wants a model with hex-nuts or squere-nuts PM me and I will make it possible.
Print Settings:
Perimeters: 3
Fill density: 15%
Fill patern: Cubic (or what you prefer)
Hardware:
M3 screws with a length of 4-23mm
Additional hardware if you choose to use heat inserts
M3 heat inserts with diameter 4.5mm and depth 4-6mm
In my final print I forgot to use supports and the result was perfect. But if you want to, you can use whatever type of support you prefer, but remember to not use support in the screw holes.
If you choose to use support, I would like to recommend “organic / tree" support