Articulated factorio inserter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fully articulated factorio inserter using a ball bearing
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 62
- Wydruki
- 1
- Wyświetlenia
- 519
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a fully articulated version of a factorio inserter (loosely based on some reference images). Every joint is pose able and the claws can flex open to grab something.
I only found a model that didn't move and a big model that required servos so this is a nice middle ground.
I used a standard skateboard ball bearing (22x7mm / 608) to lower the center of gravity and have it rotate smoothly, but it should be perfectly possible to use a 3d printed version. The screws (m2) are required, you can probably use 6mm screws for everything but I used 8mm for the base and head and 2 4mm screws for the joint on the arm.
The base needs supports, the rest can be printed without (do orient it correctly!). As a pro tip you can apply fuzzy skin to the parts that join together so they hold their position better