1 / 4
Hose Adapter for Ridgid Vacuum to Ryobi Miter Saw — zdjęcie 1
1 / 4

Hose Adapter for Ridgid Vacuum to Ryobi Miter Saw

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Hose adapter to fit a 14 gallon Ridgid shop vacuum with a 2 1/16" (2.0685") hose to a Ryobi miter saw with a 1.65"…

Ocena
0 / 5
Polubienia
5
Pobrania
68
Wydruki
0
Wyświetlenia
620
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution

Hose adapter to fit a 14 gallon Ridgid shop vacuum with a 2 1/16" (2.0685") hose to a Ryobi miter saw with a 1.65" extraction tube. It fits well but you can add a bit of thread tape if you want more sticking power.

Included the model file so it should be easy enough to adjust it to fit your tools.

Print Settings

Printer Brand:

Prusa

Printer:

I3 MK3S

Rafts:

No

Supports:

No

Resolution:

0.30

Infill:

10% in adaptive cubic

Filament: Prusament PLA Gray


Notes:

Quite strong as printed, no need to go crazy on infill or walls beyond the 10% or 2 walls.

How I Designed This ===================

Iterated from left to right.

Started by measuring the ID and OD of the fittings and then making a tapered cylinder to fit over the pulling end and inside the vacuum hose. That seemed like it would provide the best capture performance for sawdust.

First and second versions were over-engineered and worked down to the model on the right which uses the least material while maintaining strength and function.

Category: Parts

Tagi