Lovesac Compatible Cupholder (new better version)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A cupholder compatible with the square arm Lovesac couches. It has about 2mm leeway on the arms to allow for printing…
- Ocena
- 5 / 5
- Polubienia
- 33
- Pobrania
- 249
- Wydruki
- 5
- Wyświetlenia
- 1295
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
A cupholder compatible with the square arm Lovesac couches. It has about 2mm leeway on the arms to allow for printing error without making it a loss and it doesn't hurt the functionality.
Added in my new design which uses less material and has an opening for coffee cup arms.
Print Settings
Printer Brand:
SeeMeCNC
Printer:
Rostock MAX
Rafts:
No
Supports:
No
Resolution:
0.3mm
Infill:
5%
Notes:
This can be printed without supports but you will have a rough edge on the top of the cup circle unless your bridging is really on point. At this low infill % I would suggest 5 solid top layers and you can see the errors I had when using only 3. Also definitely print it sitting on its side.
Post-Printing
You may or may not have a lot of stringing to deal with. Adding a small felt circle will make the cupholder ready to go!
Category: Kitchen & Dining