1 / 2
Kenmore Coldspot Refrigerator Water or Ice Dispenser Clip
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Kenmore Coldspot fridge; model 106.58146800 The NO momentary switch locator tabs were broken.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 61
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
The locator tabs on the momentary switch that controlled the water for my fridge were broken, so the switch wasn't in the right spot. I designed this to snap on to the existing framework of the dispenser. If you need it for the ice side, just mirror it.
I'm providing f3d, and STP files, incase you need to modify it. I had one lateral retainer clip still intact, so I didn't have to account for lateral movement.
Prints with minimal supports. I used PLA, 2 perimeters, 15% infill.
