1 / 2
WMF snack to go extension filament dryer — zdjęcie 1
1 / 2

WMF snack to go extension filament dryer

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Convert your WMF food dehydrator into filament dehydrator.

Ocena
0 / 5
Polubienia
2
Pobrania
18
Wydruki
0
Wyświetlenia
80
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution

Convert your WMF snack to go dehydrator into a filament dehydrator. If your printer can print huge things, you can just print the "Single Piece", if not you can print the "Half Pipe" two times and glue both together e.g. with superglue.
I printed the "half pipes" in clear PETG with 5mm brim and added a very thin wall between the loose ends to prevent from overturning during the print. The wall was cut off before final assembly. I recommend to print the extension upside down, so no supports are needed.
Enjoy

Tagi