1 / 3
Wall Mount for LEGO F1 Mercedes 42171 Vertical Print
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed so that it can be printed upright on the print plate, without any supports, and with layers in strong direction.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 105
- Wydruki
- 0
- Wyświetlenia
- 854
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Share Alike
This is intended to be printed upright on the build plate, and should not need any supports. This was all done with the modifiers available in Prusa Slicer, so it takes a touch of work, but it came out good. It's been up on my wall for ~1 year at the time of posting this and is holding up great.
You can see my settings, but it's been fine-tuned for my own printer and filament so you will need to update for your own.
Recommend 3+ perimeters.