1 / 3
1930s Wear-Ever juicer feet — zdjęcie 1
1 / 3

1930s Wear-Ever juicer feet

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement feet for the original rubber feet that have crumbled or worn out

Ocena
0 / 5
Polubienia
0
Pobrania
12
Wydruki
0
Wyświetlenia
47
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Share Alike

Cast Aluminum Wear-Ever juicer from the 1930s or so has rubber feet that get stiff and crumble after 80+ years! Print 4 of these replacements in TPU, pry/scrape out the old ones and these slip right in. The insert diameter is 11 mm in case you don't have the same model.  I recommend 3 walls, 20% cubic infill of 90a or 95a TPU.  The first photo shows original feet on the left for comparison.

Tagi