Honda Del Sol Sail Panel Garnish Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Honda Del Sol Sail Panel Garnish Clip (the square elbow one)
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 247
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a replica of the now discontinued sail panel garnish clip on the Honda Del Sol, Part number 91505-SR 003, I already fixed all my leaks a year ago but took it all back apart just to model this for you all, you're welcome lol.
IMPORTANT: You will need to use silicone or your choice of sealant to put under and around the clip to waterproof it, the factory ones came with a rubber gasket and obviously this doesn't have one.
PRINT SETTINGS:
PETG recommended for strength but PLA will probably be ok too
Print Slow like 60mms for max layer adhesion
4 wall loops
.20 or .24 layer height (.24 has a little better strength)
Supports needed
If you would like to leave a tip for my hard work you can do so here :D https://www.paypal.com/ncp/payment/Y5DRF7PN8S5AJ