Peloton Bike+ Phone & Ear Bud Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sturdy phone and ear bud holder for your Peloton Bike+
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 92
- Wydruki
- 1
- Wyświetlenia
- 346
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Indoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
I couldn't find any phone holder I liked for the Peloton Bike+. I printed other models and wasn't thrilled. Too loose, nothing keeping the phone from getting knocked off the sides, Wasn't securely mounted, got in the way when rotating the screen…..and most importantly, no where to put my ear buds/case.
So, I designed this phone and earbud holder. I took a different approach and use the inside of the handle bars to secure the holder in place. It's a perfect fit on my Bike+. There's no side to side movement. The phone holder has tapered 8mm high sidewalls and a 12mm lip at the base. The phone in the pictures is a Google Pixel 8XL with case. There's plenty of room for an even larger phone.
Underneath the phone holder is a recessed pocket to hold your earbuds or airpods. It is 25mm deep, 54mm wide, and 69mm tall and designed to fit most popular earbud cases so that they sit flush underneath your phone. The picture shows the Pixel Buds Pro2 case. and, there's a recess for your fingers making it easy to remove your buds from the holder.
This is printed with a .4mm nozzle, .24mm layers, 3 walls, and 15% grid infill. Filament was Polymaker High Temp PLA-GF and I used Bambu PETG for a support interface. You do need supports for the earbud well but that's the only place where they are needed.
Please give me your feedback. I hope you enjoy this print.