Lava structure tile - Hueforge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lava structure tile - 113.33x170 mm - Hueforge - Frameless - AI image
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 94
- Wydruki
- 1
- Wyświetlenia
- 316
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Share Alike
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 113.33x170mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.88mm and the Actual Thickness is 2.56mm
Filaments Used:
#ffff89 PLA HIGH SPEED 3DPower Amber Yellow Transmission Distance: 6.2
#ffa62c PLA HIGH SPEED 3DPower Papaya Orange Transmission Distance: 5.7
#e62a1c PLA HIGH SPEED 3DPower Flame Red Transmission Distance: 3.3
#8c442f PLA BambuLab Cocoa Brown Transmission Distance: 0.3
#000000 PLA+ HIGH SPEED Jamg He Black Transmission Distance: 0.3
#c4c4c4 PLA HIGH SPEED 3DPower Telegrey Transmission Distance: 3.1
#ffffff PLA Alzament White Transmission Distance: 5.6
This print uses 7 unique filaments
Swap Instructions:
Start with Amber Yellow
At layer #6 (0.56mm) swap to Papaya Orange
At layer #14 (1.2mm) swap to Flame Red
At layer #18 (1.52mm) swap to Cocoa Brown
At layer #20 (1.68mm) swap to Black
At layer #25 (2.08mm) swap to Telegrey
At layer #29 (2.4mm) swap to White for the rest.
Frame for this print is here:
https://www.printables.com/model/1387171-freestanding-picture-frame-for-my-hueforges