COB LED lighting addition for slotted riser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Add COB LED light bars the the Centauri Carbon. In my experience this is needed even for the CC with light bars.
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 24
- Wydruki
- 1
- Wyświetlenia
- 384
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I have printed the excellent sliding riser from Ccraft3d https://www.printables.com/model/1292227-v2-new-elegoo-centauri-carbon-sliding-riser-with-p
My CC is the latest revision with the new light bars. But, even with these, I was not satisfied with the lighting.
This model is an easy bolt on add-on for the slotted riser onto which you can stick 12V or 24V COB LED bars. (I used these: https://www.amazon.co.uk/dp/B0DRJPRJ78?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1)
You will need to drill 2.5mm holes in the riser and then screw these LED supports in using M3x10 bolts. The LEDS are angled down into the printer and give you way better lighting with no glare.