LivelySpool: Old spool to bambulab master spool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Convert an old plastic spool to bambulab/azurefilm refil spool
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 6
- Wydruki
- 1
- Wyświetlenia
- 130
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
LivelySpool – Give New Life to Your Old Spools
Do you have a pile of empty plastic filament spools lying around? Want to start buying refill filament, but don’t have a master spool?
Most 3D printable master spool designs take a long time to print and require a fairly large build plate — not ideal for smaller printers like the Voron Zero.
With LivelySpool, you only need to print the inner core of the spool. The outer wheel parts from your old plastic spools can be reused, saving both time and filament, while also keeping plastic waste out of landfills.
Assembly Instructions
Cut out the middle section of your old spool as flush as possible.
Use the outer fixture as a template to drill 4 holes in the spool wheels
Print the new core tube and outer fixture ring. (If you are printing Azurefilm core, you have to print 2 of the Azurefilm core. For Bambulab, print core1 and core2, always print 2 outer fixtures)
Assemble everything using 4× M3 bolts (at least 10 mm long) per side. (Depending on the spool design, you may want to use some glue for the outer fixture)
Compatibility
I recommend printing with at least PETG or ABS if you want to use it in a filament dryer
Tested with Azurefilm (old) spools — works great. Hopefully, others can test with additional spool brands and share results.
Customization
Since spool dimensions vary, I’ve included: The Fusion 360 source file with a parametric model of the outer fixture. A set of dimensions for users working in other CAD programs, so the design can be adapted easily.
OpenSCAD
There is also an OpenSCAD model available now for any users who do not know CAD. To use, download the .scad file, open it with OpenSCAD program or eddit it with a web based edditor like this one: https://ochafik.com/openscad2 (since the page doesn't yet support file upload first rename the .scad file to .txt and open with a text editor like notepad then copy and paste the code to website click on customize and after you are done clikc render and donload your new .stl). Or customize it on makerworld: https://makerworld.com/en/models/1711273-livelyspool-old-spool-to-bambulab-master-spool
