Shade Foregrip rail insert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an attachment for all the existing Shade Foregrips, adding a rail segment to the bottom of the grip. This…
- Ocena
- 4 / 5
- Polubienia
- 43
- Pobrania
- 140
- Wydruki
- 1
- Wyświetlenia
- 1142
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an attachment for all the existing Shade Foregrips, adding a rail segment to the bottom of the grip. This allows you to mount and stack additional attachments like flashlights, lasers, more foregrips, etc....
The picatinny insert slides into the bottom of the grip. New side panels replace the old ones and hold a bolt (M5x25mm) and a hex nut to secure the insert.
The design of the new parts is downward compatible with all the existing Shade designs without any modifications.
I've included blank and hex-pattern side panels.
Again like always the .stp file with panels and insert is included.
Thanks to user 'TheFrenchiestFry' who suggested the rail on the bottom!
Print Settings
Supports:
Yes
Resolution:
0,2mm
Notes:
Print the insert in the default orientation. The insert comes with custom support to ensure a clean outer edge. Still, this piece has to be printed with support settings on. I recommend 'only touching build plate'.
Category: Toy & Game Accessories