TSDZ2 to TSDZ2B Upgrade
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Upgrade your original TSDZ2 to TSDZ2B
- Ocena
- 0 / 5
- Polubienia
- 1
- Wydruki
- 0
- Wyświetlenia
- 422
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Commercial Use - No Derivative
Do you want your original TSDZ2 to pedal like a normal bike when you have no battery assist or a flat battery, and be generally quieter and smoother? If yes, upgrade your TSDZ2 to TSDZ2B spec with this cover and seal and a few other TSDZ2B parts.
The parts you will need are:
- TSDZ2B Main Gear.
- TSDZ2B White Gear.
- TSDZ2B Spider.
- This cover and seal.
The cover should be printed out of a dimensionally stable filament as the tolerances are tight. The blue one pictured was PLA and was on the bike for months, it fit perfectly, I could have left it but I wanted to try it in ASA. The ASA version shrunk ever so slightly and was tricky to fit. My final version is ASA-GF and it fits perfectly.
There is a complete version and a two piece version. I prefer the two piece version as it prints better with minimal support and seems slightly stiffer when assembled.
The seal should be printed out of 85A TPU or similar. I tried 95A and it was quite stiff but still worked. Use plenty of grease!
It is an easy upgrade, just swap the parts over, and totally worthwhile.
Any questions, please ask!