Mean Well RD-85A mount bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounting bracket for the Mean Well RD-85A power supply for wall or similar mounting.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 233
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Mean Well RD-85A is a fanless AC-DC dual output power supply - 5Vdc 10A and 12Vdc 5A.
I'm using the Mean Well RD-85A power supply to power 130 LED lights (SK6812 RGBW - 5v at a max of 5A) and a Raspberry Pi 4 (5v at a max 3A) as part of the enclosure for my Prusa i3 MK3S+.
(The 12-volt side of the RD-85A is for future features, such as a 12v exhaust fan.)
The power supply has built-in holes/cutouts for mounting, but I needed something that would compensate for 3mm of space behind the power supply due to a cover I also designed.
You will need these screws to finish the project:
- To attach the mount to the power supply: M3 x 6mm (qty 3)
Printing:
*See images for slicer orientation
- Print settings: 0.20mm Quality
- Filament: PETG
- Supports: None
- Infill: 15%
- Other: I use 3 Perimeters and Detect thin walls, but those may not be needed
Check this out too:
I've also designed a power terminal cover with an AC power switch for the Mean Well RD-84A that works with this mounting bracket: https://www.prusaprinters.org/prints/138897-mean-well-rd-85a-switch-cover-with-output-connecto
This project was designed from scratch but inspired by the project “Mean Well RD-65A Bracket” by “E_Raw” found on Thingiverse: https://www.thingiverse.com/thing:4850096