Sovol Zero 608 Bearing Spool Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A spool holder for the stock mounting location on the Sovol Zero that uses a 608 bearing mount.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 69
- Wydruki
- 1
- Wyświetlenia
- 269
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I didn't like the stock Sovol Zero spool holder; the little PTFE hack they used to reduce friction helps, but not nearly enough compared to something with proper bearings. Thankfully I'm feeding out of a drybox most of the time, but sometimes I want to mount up a one-off spool for something quick. I liked M1324's 1515-extrusion bearing-based spool holder, but it's meant for a proper extrusion, not the drilled oddballs that Sovol used. So, I made a quick remix with a flat mounting surface and a matching bolt pattern.
The only part I've actually changed is the main body, you can use the rest of the parts from the original model (including whichever axle you'd prefer). The parts you want are for 1515 extrusions. Any two 608-sized bearings should work fine (I had some leftover 608-ZZs from another project, but 608-2RS and similar should be fine too. You could also just print some.)
Reuse the Zero's screws, they should fit perfectly. My Zero is the original style with the spool holder oriented in the back, but the newer side mount should be the same mounting pattern.