Core ONE - PSU Cover Mount for Power Transformer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A little mod to allow you to hide a 24V to 5V power transformer behind the cover for the Core ONE power supply.
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 37
- Wydruki
- 3
- Wyświetlenia
- 524
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a little mod for the Core ONE PSU Cover to hold a 24V to 5V power transformerr to power other projects. I used this Model from Bauer Electronics.
WARNING: This is supplied as is and you will use this at your own risk. Only try this if you know what you are doing. You can damage your printer or injur yourself as this nvolves adding things to the PSU!
Requiered parts:
2x M3 Heatset Inserts
2x M3x8 Screws and Washers
Print it in PETG or for max safety Prusament PETG V0. You will need some supports for this.