1 / 2
Ninja Creami Deluxe Tub Flattener
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed one so I modeled one up! There are two versions: longer handle and shorter handle.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 108
- Wydruki
- 0
- Wyświetlenia
- 568
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 2)Remiksy (1)Kolekcje (15)Powiązane
I needed one so I modeled it up! There are two versions; one with a longer handle and one with a shorter handle that you could theoretically use while freezing your base at max capacity. The longer one (which I originally modeled) was designed so that I could flatten a base I had already spun but didn't finish! It's a quick print (~45 minutes on Bambu P1S). I suggest 20-25% infill and 4 walls, no supports needed!