LG G7 (with case) Phone Stand / Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A stable, massive phone holder for the LG G7 that enables access to the headphone jack and the USB-C port.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 62
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Share Alike
A stable, massive phone stand that fits the LG G7 inside a protective case nicely while not just maintaining the ports on the bottom, but also all buttons and the fingerprint sensor on the back accessible.
This model should be printed with support if its printed standing up as the front part of the phone holder shell has quite some overhang. I havent tested this but if the model is laid on it's side it might be possible to print without support.
The model in the photo is printed with a stock Creality K1C and black Soleyin PLA.
I might publish a second variant for the bare phone without it's casing at a later time.